2
CONNECTIONS TO BE MADE
INSTALLING THE INTERFACE
From the aftermarket radio to the AX-PO904 harness:
• Connect the
Black
wire to the ground wire.
• Connect the
Yellow
wire to the battery wire.
• Connect the
Red
wire to the accessory wire.
• If the aftermarket radio has an illumination wire, connect the
Orange
wire to it.
• Connect the
Blue/White
wire to the amp turn-on wire.
The following (3) wires are only for multimedia/navigation radios that require these wires.
• Connect the
Blue/Pink
wire to the VSS/speed sense wire.
• Connect the
Green/Purple
wire to the reverse wire.
• Connect the
Light Green
wire to the parking brake wire.
• Tape off and disregard the following (8) wires, they will not be used in this application:
Gray
,
Gray/Black
,
Green
,
Green/Black
,
Purple
,
Purple/Black
,
White
,
White/Black
• Connect the
Red
and
White
RCA jacks to the front amplifier output jacks of the aftermarket radio.
With the key in the off position:
• Connect the AX-PO904 harness to the AX-PO904 interface.
• Connect the AX-PO904 harness to the AX-PO904 amplifier interface.
• Remove the dust cover from fiber optic port in the AX-PO904 amplifier interface.
• Connect the factory fiber optic cable into the AX-PO904 amplifier interface.
• Connect the AX-PO904 harness to the wiring harness in the vehicle.
