12
AX-DSP-X APP
(CONT.)
Crossover Adjust
• If installing a subwoofer, the front and rear outputs will default to a
100Hz high pass filter to keep the low frequency signals out of the
full range speakers. If a subwoofer is not being installed, change the
front and rear crossover points down to 20Hz for a full range signal,
or to the lowest frequency the speakers will play to.
• Selecting
High Pass
and
Low Pass
will provide one crossover frequency
adjustment. Selecting
Band Pass
will provide two crossover frequency
adjustments, one for low pass, and one for high pass.
Continued on the next page
Summary of Contents for AX-DSPX-WR
Page 19: ...19 REV 10 14 2019 INSTAX DSP X...
