2
CONNECTIONS TO BE MADE
From the AX-DSP harness to the aftermarket amplifier(s):
16-pin and 20-pin harnesses
• Connect the
Blue/White
wire to the amplifier turn-on wire/input.
• If installing an AX-BASSKNOB (sold separately), connect the
Orange
wire to the
Orange
wire from the AX-BASSKNOB.
• Connect the
Gray
RCA jack to the right front input.
• Connect the
White
RCA jack to the left front input.
• Connect the
Green
RCA jack to the left rear input.
• Connect the
Purple
RCA jack to the right rear input.
• Connect the
Red
&
White
RCA jacks to the subwoofer input.
• Connect the
Red
RCA jack to the center channel input.
• Tape off and disregard the following (8) wires, they will not be used in future applications:
Black/Yellow
,
Brown
,
Purple
,
Purple/Black
,
Red/White
,
White
,
White/Black
,
White/Red
From the amplifier bypass harnesses to the aftermarket amplifier(s):
12-pin Green harness
• Connect the
White
wire to the front left positive.
• Connect the
White/Black
wire to the front left negative.
• Connect the
Gray
wire to the front right positive.
• Connect the
Gray/Black
wire to the front left negative.
• Connect the
Brown/Yellow
wire to the front left tweet positive.
• Connect the
Brown/Blue
wire to the front left tweet negative.
• Connect the
White/Red
wire to the front right tweet positive.
• Connect the
Red/White
wire to the front right tweet negative.
• Connect the
Green
wire to the rear left positive.
• Connect the
Green/Black
wire to the rear left negative.
• Connect the
Purple
wire to the rear left positive.
• Connect the
Purple/Black
wire to the rear left negative.
