Axxess AX-AM-VW91, Installation Instructions Manual, Page: 2 / 8

2
CONNECTIONS TO BE MADE
FRONT
CAM
IN
REAR
CAM
IN
ACC
PWR
OUT
REAR
CAM
PWR
FRONT
CAM
PWR
CAM
GROUND
HDMI LVDS OUT LVDS IN AV IN POWER
IN
(Connections Diagram)
• If installing a front/rear camera, connect the Black wire labeled “GND”,
to the camera(s) ground wire.
• If installing a backup camera, connect the
Red
wire labeled “Reverse Camera 12v”,
to the backup camera power wire.
• If installing a front camera, connect the Red wire labeled “Front Camera 12v”,
to the front camera power wire.
• The Red wire labeled “Acc Power Output” is optional if a power source is required
while a camera is active.
• If installing a backup camera, connect the RCA jack labeled “Reverse Camera Video Input”
to the camera.
• If installing a front camera, connect the RCA jack labeled “Front Camera Video Input”
to the camera.
• If adding an HDMI input to the factory radio, connect an HDMI cable (Axxess part number
AX-HDCABLE, sold separately), to the port on the AX-AM-VW91 labeled “HDMI IN”.