5
REV. 6/30/2018 INSTAX-AM-AU96
Button Configuration
USER GUIDE
HDMI access
To activate AUX-IN, an “AMI to 3.5mm AUX cable” will be required (not included).
• Select AUX-IN as a source from the factory radio.
• Press and hold the “RETURN/BACK” button for 2 seconds to switch between the factory
screen and the AX-AM-AU96 screen.
• Double tap the “RETURN/BACK” button to disable the video-in-motion warning message.
Rear camera access
• The backup camera will automatically activate while the vehicle is in reverse gear.
• Deselecting the reverse gear will activate the front camera, if installed and dip switch 2 is
selected to “ON”.
Note:
This camera takes priority over HDMI mode, and front camera mode. But will not deactivate the
front camera. Double tap the “RETURN/BACK” button, or drive over 10 mph, to cancel front camera mode.
Front camera access
• Ensure dip switch 2 is selected to “ON”.
• Press and hold the “RETURN/BACK” button for 2 seconds to activate the front camera.
View Version Number
• Press and hold the “RETURN/BACK” button for 8 seconds to enter the firmware information screen.
MMI Type 1 (Return Button)
MMI Type 2 (Back Button)
Summary of Contents for AX-AM-AU96
Page 6: ...6...
