8
The ASWC-1 can be programmed in two ways. (1) It can do it by itself
through Auto Detect Mode, or (2) it can be manually programmed in
non-data vehicles. It is strongly recommend to start with the
Auto Detect Mode first.
Auto Detect Mode: Overview
The ASWC-1 has the ability to auto detect certain vehicles and to know
what aftermarket radio it is connected to. The vehicle info sheet from the
Axxess website (www.axxessinterface.com) will indicate if your vehicle
will likely be auto detected and what action, if any, is required by you for
this process to take place.
For the Auto Detect feature to work there are 3 possible actions, however
only one action will be required by you depending on your vehicle:
• Turn the ignition on and no other action is required.
• Turn the ignition on, press and hold the “Volume Up” button on the
steering wheel.
--- Or ---
• Turn the ignition on, press and release the “Volume Up” button
repeatedly on the steering wheel.
As stated before, only one of these actions will need to be done
depending on your vehicle for the Auto Detect feature to work.
Please refer to the vehicle info sheet provided on the Axxess website.
Auto Detect Mode: Steps
1) Complete connections to the vehicle and the aftermarket radio.
If this is the first time the ASWC-1 is being installed in a vehicle:
Section 2: Programming
