CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AXADBX-1
I N S TA L L AT I O N I N S T R U C T I O N S
AxxessInterfaces.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
REV. 1/30/20 INSTAXADBX-1
INTERFACE FEATURES
ADBX Series - Main Interface Control Box
• Provides accessory power (12-volt 10-amp)
• Maintains the retained accessory power (R.A.P.) feature
• Can be used in non-amplified, or analog/digital amplified models
• Retains warning chimes (GM)
• Retains the turn signal click (GM)
• Provides NAV outputs (parking brake, reverse, speed sense)
• Pre-wired AXSWC harness (AXSWC sold separately)
• Retains OnStar/OE Bluetooth
• Adjustable gain control for overall volume digital amplified models
• Adjustable gain control for chimes and OnStar (GM)
• Retains SYNC in Ford vehicles
• Adjustable gain control for SYNC (Ford)
• Retains Blind spot detection system in Chrysler/Dodge/Jeep (if equipped)
• Retains balance and fade†
• Retains digital fade†
• Micro-B USB updatable
APPLICATIONS
See application list on page 2
Note:
This is a general list for the AXADBX-1 lineup. Please reference the individual harnesses for exact features available.
†
Excluding Ford and VW vehicles with digital amps
INTERFACE COMPONENTS
• AXADBX-1 interface
• 16-pin harness with stripped leads
INTRODUCTION
The AXADBX-1 main interface control box is designed for, and must be
used along with, the appropriate vehicle wiring harness (sold separately).
Summary of Contents for ADBX Series
Page 6: ...6...
Page 7: ...7 REV 1 30 2020 INSTAXADBX 1...
Page 14: ...6...
Page 15: ...7 REV 1 30 2020 INSTAXADBX 1...
