I N T E R C O M - S Y S T E M
®
Operation Manual
1
2
3
5
4
6
7
8
9
10
ProAudio Technik Josef Becker · Zum Wartturm 15 · 63571 Gelnhausen (Germany)
Fon: +49-6051-9140-0 Fax: 9140-59
·
[email protected] · www.proaudio-technik.de
CP-100 loudspeaker station
Due to its compact size this loudspeaker station is also favourably used as
a small main station. The model CP-100 may be looped in to the signal chain
like any of the other intercom components. It derives its supply voltage from a
main station via the microphone cable. LINE IN: This is the intercom connec-
tor for the microphone cable from the main station. LINE OUT: is for looping
through the system to other intercom stations. Right hand you will notice a
RJ-45 connector for supply voltage in case the loudspeaker station should not
get its voltage from another main station.
Controls on the front side
HEADSET
connector (
1
);
MIC
connector (
2
). Instead of connecting a headset here
these inputs also can be used for connecting another external microphone such
as a gooseneck or handheld (dynamic). In this case the loudspeakers will be used
instead of the earphone. In case you use a headset you can disengage the built-
in loudspeaker with the
SPKR switch
(
3
). Right from this you will find the
CALL
button (
4
). Beneath is an ON/OFF switch for the buzzer alarm. The 3-position
talk switch (
5
) has the options: OFF, PTT (Push To Talk) and ON. The level of the
loudspeaker or the earphone of the headset is controlled by the potentiometer (
6
)
.
SIDE-TONE
: To control the cue volume of your own microphone (
7
).
The model CP-100 features a very robust 1/2 19" steel case with rubber feet for
table use. In case you would like to mount the CP-100 in a 19" rack, we have avail-
able a rack mount kit RMK-100. It may also be mounted to the wall with a special
wall mount kit WMK-100.
Controls on the rear side
LINE IN
(
8
): This is the XLR intercom connector for the microphone connection
cable to the main station.
LINE OUT
(
9
): Serves as loop through to other intercom stations. On the right
hand is the RJ-45 connector(
10
) which can be used for power supply of the unit
in case it is not powered by other main stations.
As mentioned before the CP-100 can be either used as a loudspeaker station or
as a small main station. As loudspeaker station the power supply is derived from
a main station such as the models MS-200 or MS-100. If your prefer the CP-100
as a small main station you may also connect the external power supply RS-1
which also can provide the operating voltage for up to 4 beltpacks.
As indicated before the model CP-100 may be used as loudspeaker station
as well as a small main station. As a loudspeaker station the voltage is sup-
plied by a main station such as the models MS-200 or MS-100. In case you
prefer to operate the CP-100 as a small main station, an external power supply
RS-1 may be connected which in addition can provide operating voltage for up
to 4 beltpacks.
