CAUTION
1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20
cm must be maintained between the antenna of this device and all persons.
2. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Get to know us at: www.axvue.com
Colors and styles may vary.
Please retain information for future reference.
connect with us:
AXVUE stands behind all of its products.
If you are not completely satisfied or have any questions,
please contact us at http://www.axvue.com
AXVUE INC.
All rights Reserved.
Model: E662 12/17
MADE IN CHINA
732-0E06620-0700
Sound Lights
TO SET UP VOX - Video On Crying
When the monitor is working in power-saving screen off, the video may be triggered on if volume is
higher than a value, by turning on the VOX function. Enter the MENU, select camera option,
highlight the VOX, turn on this function by selecting sensitivity - "3" HIGH, "2" MEDIUM, "1" LOW.
OFF
1
2 3
VOX
Adjust To Preferred Color Temperature
Turn on the color temperature function and select the mode you want.
VOX
Setup & use (continued)
The SCAN, SELECT, ADD, DELETE, VIEW CAMERA menu options are used with addtional
cameras only. Order the extra camera by visiting us at http://www.koehog.com .
TO DELETE A CAMERA
Camera
Deleted
VOX
1
2
2
3
4
TO SELECT A CAMERA
Selected camera will
appear on the screen
VOX
1
1
2
3
4
TO SCAN ALL CAMERAS (AUTO-SCAN)
The monitor can switch to each camera automatically if it was paired with 2 more cameras.
Step 1: Press Menu / OK shortly to enter menu, then press Left button to highlight the camera
option function and press Menu / OK to confirm.
Step 2: Using the Left or Right button to highlight SCAN CAM and press Menu / OK to active.
Step 3: Scanning cameras will start, cycling shows each camera for 8 seconds and the scan number will
show on the screen.
Step 4: Press the Power / Video to exit the scan mode.
All cameras can be
auto-scanned
to view on an 8-second
rotation.Press to
stop at current camera.
VOX
-Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
-Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
-Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
-Unplug this product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
*When the power-supply cord or plug is damaged.
*If liquid has been spilled, or objects have fallen into the product.
*If the product has been exposed to rain or water.
*If the product does not operate normally by following the operating instructions. Adjusting only
those controls that are covered by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
*If the product has been dropped or damaged in any way, or when the product exhibits a distinct
change in performance - this indicated a need for service.
-Replacement Parts - When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
-Safety Check - Upon completion of any service or repairs to this product, ask the service technician
to perform safety checks to determine that the product is in proper operating condition.
-The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
-The product should be situated away from heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce heat.
FCC Information
CAUTION
Changes or modifications not expressly approved by AXVUE may void the users authority to operate
this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
IMPORTANT SAFETY INSTRUCTIONS
-Read safety and operating instructions before the product is operated.
-Retain instructions for future reference.
-Heed warnings on the product and in the operating instructions.
-Follow instructions and operate properly.
-Clean it after unplugging this product from the wall outlet. And use a damp cloth for cleaning.
-Use product manufacturer recommended attachments to avoid possible hazards.
-Do not use this product near humid place, for example, bath tub, wash bowl, kitchen sink, laundry
tub, wet basement, swimming pool and the like.
-Ensure this product is installed securely on a stable cart, stand, tripod, bracket, or table. -Otherwise,
The falling product may cause serious injury to a child or adult, and serious damage to -the product.
-Use manufacturer recommended cart, stand, tripod, bracket, or table. Follow the manufacturer's
instructions strictly and use recommended mounting kits to mount the product.
-The slots and openings in the cabinet are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating, and keep these openings not blocked or covered.
-The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar
surfaces. This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
-This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer
to the operating instructions.
-Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
-An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
DO NOT EXPOSE TO RAIN OR MOISTURE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SQUEALING SOUND COMING FROM SPEAKER ON MONITOR
-Move the monitor and camera further away from each other.
-Turn the volume down using Volume Control.
-Power the monitor completely off, remove and re-insert the battery, then turn the monitor on
-Position the monitor closer to the camera, but not adjacent.
-Move the monitor away from other electronic devices, WiFi router, etc.
-Adjust the brightness using Brightness Control.
-Test reception by moving the monitor and / or camera to different locations.
PICTURE NOT CLEAR
Favorite features
DIGITAL ZOOM
The zoom option enables you to get a closer view on screen. Press the Talk Back / Zoom once to
move the image on the monitor screen to 2x view, press again to return the normal view.
TWO-WAY COMMUNICATION
Your baby is always eager to your voice when crying. Press and hold the Talk Back / Zoom button on the
monitor to activate two-way communication. Release the button to end the two-way communication mode.
NIGHT VISION
The infrared around the lens will light up automatically after you turn off the light in your room and
then it will enter the night vision mode. The image on the monitor screen is black and white when
the camera is in a low-light.
FAQ
VIDEO ON/OFF
SOUND LIGHTS
The LED light bar on the top of the monitor will light up as it picks up voices. Softer sounds will light
up the green or amber LEDs. Louder noises will light up all the LEDs
.
ADJUSTING BRIGHTNESS
VOLUME CONTROL
Press the Menu / OK button and then choose the brightness option and press the MENU / OK
button to enter it, and then press the Left or Right button to adjust the brightness you want.
Volume adjustments allow higher volume settings for parents who want to hear every little sound
from baby, like cooing, and lower volume settings to monitor louder sounds and crying from baby.
Easily adjust your desired volume level by pressing Volume up or Volume Down button.
To preserve battery life when not plugged into AC Outlet, you can turn off the monitor’s video by
pressing Power / Video button, the screen will go dark. The audio and sound lights will still
remain activated allowing you to monitor sounds. Press the button again to resume Video
NO PICTURE OR SOUND
-Make sure the camera and handheld monitor unit are paired .
-Make sure the camera and handheld monitor unit are both turned on.
-Make sure the AC adapters are plugged in.
-Make sure the outlets are working.
-Make sure the battery is charged before working in portable mode.
-Keep the camera and monitor away from
WiFi router (more than 10 feet off
) .
SOUND BUT NO PICTURE
-Press the Power / Video
button once to turn on video mode.
-Check to make sure nothing is blocking the camera.
-Test reception by moving the monitor and / or camera to different locations.
-Pair the camera and monitor again.
PICTURE BUT NO SOUND
-Power the monitor completely off, remove and re-insert the battery, then turn monitor back on.
-Turn up the volume using Volume Control.
-Make sure the camera and handheld monitor unit are paired.
