Hardware Operation Manual
22
Installing memory module
To install a DDR SDRAM ensure the system is power off and disconnected. Then:
1: Removing the controller module from Raid system.
2: Open the cover of controller module .
3.Insert a memory module into the memory socket .
4.Close the cover of controller module .
Before starting any kind of hardware installation, please ensure that all power
switches have been turned off and all power cords disconnected to prevent
personal injury and damage to the hardware
Use screws provided with RAID system only. Longer or shorter screws may
cause electric shorting or un-proper installed.
Static electricity can damage electronic components. To guard against such
damage:
Work in a static-free environment
Wear a grounded anti-static wrist strap
Store uninstalled components in anti-static bags
Handle PCBs by their edges and avoid touching chips and connectors.
