3
Installation
Place the faucet and sealing ring on the mounting surface.
Install the slide washer, friction washer, and collar nut.
Tighten the collar nut by hand.
Tighten the tensioning screws.
Install the drain pull rod.
Installation Considerations
For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to com-
plete the installation.
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
•
•
•
Significant pressure differences between the hot
and cold supplies should be corrected.
Flush the hot and cold supplies thoroughly
before installation of this faucet. Damage
caused by debris is not covered by the warranty
Model 37028XX1 does not include a drain or
a pull rod.
•
•
•
