Axor Citterio 39136XX1 Installation Instructions Manual Download Page 2

2

Axor Citterio Widespread Lav Mixer  39136XX1

Axor Citterio Bidet Mixer  39236XX1

39136XX1

39236XX1

Technical Data

Recommended hole size 

spout  1 3/8“

valves 1 1/4“

Maximum depth of mounting surface 1 1/8“

Flow rate @ 45 psi 

    

2.2 gpm

Maximum water pressure 

   

145 psi

Recommended water pressure:      

14.5 - 75 psi

Recommended hot water temp.:      

120

o

F - 140

o

F*

*Some municipalities limit the maximum water temperature from the water heater to 120

o

 or below.  Please 

know and follow all applicable local codes when setting the temperature on the water heater.

Prepare to install the faucet:

Prior to installation, install the supply stops.  

Hot and cold supply lines and nuts are not included with the faucet.  They must be purchased 

separately by the plumber or by the consumer.

Flush the supply lines thoroughly.  Damage to the faucet caused by debris in the water line is not 

covered under the limited lifetime warranty.  

39156XX1

User instructions

Turn the right handle forward (clockwise) to 

turn the cold water on.  Turn the handle back 

(counter-clockwise) to turn the cold water off.

Turn the hot handle forward (counter-clockwise) 

to turn the hot water on.  Turn the hot handle 

back (clockwise) to turn the hot water off.

Summary of Contents for Citterio 39136XX1









Reviews: