107
AXOR Industries
Service Manual
NanoMack
®
ver.1 rev.11/'19
5.9 Analog I/O window
This window allows you to control and condition the analog signal of the differential or common mode
reference from the external controller.
• Input Value
It visualises in “mV” the voltage measured on the analog inputs This value depends by the Offset, the
Filter and the Dead Band settings.
• Dead Band
If the voltage on the analog inputs is within the range [-Dead Band, +Dead Band], the analog refer-
ence is zero.
• Offset
Voltage in “mV” on the analog inputs taken as zero reference.
• Filter
Filter in “ms” on the analog input signal.
• Auto Offset
This button
automatically
execute the settings of the offset.
