Axopar 37 XC Owner'S Manual Download | Manualshive

Page: 28 / 68

background image

4. Product description

(1) STB Engine
(2) PORT Engine
(3) Service
(4) Heavy Aux

4.2.4. Direct supply switches

Some of the devices in the boat are supplied by direct supply switches. Direct supply switches are

intended for such equipment that need current when main switches are turned off.
When pushed down, the switch is on and when pushed up it is off. The switch indicates a short circuit or

interference in the electronic circuit by springing up to the “off” position. The switch can be reconnected

by pushing it back down to the “on” position. Do not reconnect the switch before you have found out the

reason for the interference.
The direct supply switches must be left on even if the current from other circuits is switched off. An

appliance that is switched off too early may cause the appliance to overheat and become damaged.

WARNING

Turning the direct supply switch off too early may cause the device (for example,

the heater) to break or catch fire, because the devices have a ventilation feature

that works even if the device is otherwise switched off.

• Make sure the device is cooled down before turning it off completely. For

more information, see the manual of the device in question.

4.2.5. Fuses

The fuse panel includes fuses for the boat’s equipment.
The fuses are in the form of trip switches that break the circuit and spring up when tripped. Do not reset

the switch before you have found out the reason for the breaker tripping. After that press the switch back

down.
The fuse panel is located on aft wall of the front cabin. The panel has a combined switch and fuse for a

septic crusher (1), water pump (2) and fridge (2). The fuse panel also has a 12 V output.

WARNING

Before connecting an electric circuit, make sure that the circuit is not damaged

and that there will be no short circuit or a fire caused by possible damages in the

electric circuit. Any damaged equipment must be maintained or changed before

they are again taken into use.

Axopar 37 XC

Document ID: 37XC202004EN

Owner's Manual

© 2020 Axopar Boats

Page 26

-

-

«
...
26
27
28
29
30
...
»

Summary of Contents for 37 XC





































































Reviews:

No comments

Related manuals for 37 XC

Brand: J/Boats Pages: 88

Brand: RTM Pages: 26

ELECTRIC GLIDE ESCAPE JAZZ

Brand: Johnson Outdoors Pages: 14

Brand: Pelican Pages: 14

Brand: SeaDoo Pages: 801

Brand: TAKACAT Pages: 10

ROWonAIR AIRKAYAK 16'

Brand: Rona Pages: 2

Brand: Robalo Pages: 96

Brand: Old Town Canoe Co. Pages: 14

Brand: Lalizas Pages: 18

WaveRunner GP800W

Brand: Yamaha Pages: 122

GP760Y WaveRunner GP

Brand: Yamaha Pages: 119

Brand: Scout Boats Pages: 120

Brand: Scout Boats Pages: 135

Brand: Scout Boats Pages: 148

Brand: Scout Boats Pages: 150

Brand: Scout Boats Pages: 161

Brand: Scout Boats Pages: 166

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands