Axonics SNM System 1401, User Manual

Page: 26 / 272

22
1
Hold the Charger over your Stimulator.
Continue to slowly move the Charger in
that area until you hear one long tone. This
indicates the Charger is properly aligned
and is charging the Stimulator. The power
light on the Charger will flash green when
the Charger is charging the Stimulator.
Note: If your Stimulator battery has been inactive for an extended period
(several weeks or longer), the Charger may need to be placed over the
Stimulator for several minutes before the long tone is heard.
2
Fix the Charger in place by tightening the
Belt around your waist. Be careful not to
move the Charger away from your Stimulator.
Note: The Charge Belt should be worn directly
against the body. Longer charge times will be
needed if worn over clothing.
If using a Carrier, press the adhesive areas of
the Carrier onto your skin.
Note: The Carrier can be removed and placed on the skin again if the
location of the Carrier needs to be adjusted.
3) Place the Charger Over the Stimulator