20
Chapter 6: Maintenance and Care
General Concepts
The Bolt 2 energy weapon is a sensitive piece of electronic equipment, and should be handled with
care. Avoid dropping a Bolt 2 energy weapon. Do not use a Bolt 2 energy weapon that has a cracked
handle.
• Check the battery pack regularly.
• Perform a function test regularly.
Check the expiration of the Bolt 2 cartridges (the 5-year expiration is listed on the base of the cartridge).
Do not use an expired Bolt 2 cartridge.
• Secure the Bolt 2 energy weapon in a protective holster when not in use.
• Avoid exposing the Bolt 2 energy weapon to excessive moisture or water.
• See the troubleshooting guide at www.axon.com for additional instructions.
Function Test
A function test should be conducted every 30–60 days. The reasons for the function test include:
• To verify the Bolt 2 energy weapon is working.
• To verify that the batteries are in good condition.
To perform a function test:
1
If you are using the Axon Protect application, ensure training mode is turned on. See
for more information
.
2
Shift the safety switch to the forward (ARMED) position so the safety cap pops off.
3
Shift the safety switch to the rearward (SAFE) position.
4
Safely unload the Bolt 2 cartridge. See
5
Point the energy weapon in a safe direction (such as the floor) and ensure that your fingers and
no part of your body are in front of the energy weapon.
6
Shift the safety switch to the forward (ARMED) position.
7
Check the battery level. See
.
8
Press the firing button and confirm sparking across the electrodes at a rapid rate. Allow the
