background image

SERVICE AND INQUIRIES

and lists of authorised dealers, e-mail contact, etc.: see our webpage 

www.bavarianDEMON.com

CAPTRON Electronic GmbH

Johann-G.-Gutenberg-Str. 7

D-82140 Olching 

Germany

Fon +49 8142 4488 -0

Fax +49 8142 4488 -100

VERSION 1.2

Hiermit erklärt die CAPTRON Electronic GmbH, dass sich dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen 

und anderen relevanten Vorschriften der entsprechenden CE Richtlinien befindet. Die Original-Konformitätserklärung finden Sie 

im Internet unter www.captron.com

CAPTRON Electronic GmbH hereby declares that this device conforms to the basic requirements and other relevant regulations of 
corresponding CE directives. The original Conformity Declaration can be found on the Internet at www.captron.com.

Par la présente, la Sté CAPTRON Electronic GmbH, declare que cet appareil répond aux exigences fondamentales et à d’autres 

prescriptions  significatives  des  directives  CE  correspondantes  de  la  Communauté  européenne.  L’original  de  la  declaration  de 

conformité se trouve dans l’Internet sur le site www.captron.com.

CAPTRON Electronic GmbH, declara que este aparato cumple con las exigencias básicas y otros reglamentos relevantes de la 
norma CE correpondiente. La declaración de conformidad original, la puede encontrar en internet en www.captron.com.

Con la presente, la CAPTRON Electronic GmbH dichiara che questo apparecchio è conforme con i requisiti e le altre disposizioni 
essenziali della direttiva CE corrispondente. La dichiarazione originale di conformità è disponibile all‘indirizzo www.captron.com.

Firma CAPTRON Electronic GmbH

 tímto prohlašuje, že tento p ístroj je v souladu se základními požádavky a jinými relevantními p 

edpisy odpovídajících sm rnic CE. Originální prohlášení o konformit naléznete v internetu pod adresou www.captron.com.

D

GB

F

E

I

CSZ

IMPRINT

20

Summary of Contents for bavarianDEMON





















Reviews: