15
Axon Flex 2 User Manual
Chapter 4: Recording with the Axon Flex 2 Camera
Adding Markers to Recorded Video
The Function button also can be used to add a marker to recorded video that will show when the
video is replayed on Evidence.com and documented in the audit trail for the device. Markers are
most useful for documenting a moment that you will want to jump to quickly at a later time when
re playing the video. If you want to add a marker to a video while you are recording:
• Press and release the Function button within 1 second.
Battery Status
Press the Battery Status button to determine the percentage remaining in the battery. See
Chap-
ter 2:
Getting to Know Your Axon Flex 2 Camera
for details on the Battery LED functions.
Configuring Your Axon Camera
Adjusting the Audio Prompt Volume
1
Connect the Axon Flex 2 camera to the Evidence Sync application.
2
Select the device settings.
3
Select the desired volume settings for the audio beeps recorded by the device.
The volume has 4 settings. At each level, the camera beeps, providing you with a sample of
the volume:
• Low
• Medium
• High
• Off
Turning off the Camera LEDs (Stealth Mode)
For some situations, you may wish to turn off the LED lights on your camera. You can turn off the
lights through the Axon View application, Evidence Sync software or by using the Battery button.
To turn the lights off using the Battery Status button:
• Press and hold the Battery button for 10 seconds.
To turn the lights back on:
• Press and hold the Battery Status button for 10 seconds.
To use Evidence Sync:
1
Connect the Axon Flex 2 camera to the Evidence Sync application.
2
Select the device settings.
3
Select the option to turn off the device LEDs.
• The Operation LED flashes red, yellow, and then green before shutting down the lights.
• Pressing the Battery button will momentarily light both the Operation LED and the Bat-
tery LED, displaying the current operating mode and battery level. For interpreting the
LED colors, see
Chapter 2:
Getting to Know Your Axon Flex 2 Camera
.
