Axon APT5 Series, User Manual

Page: 56 / 126

Roam Delta When Roam Trigger is met, a second AP’s
signal strength (RSSI) must be Roam Delta
dBm stronger than moving average RSSI for
current AP before radio will attempt to roam
to the second AP 5, 10, 15, 20, 25, 30,
35, or Custom 15 dBm
Roam Period After association or roam scan (with no
roam), radio will collect RSSI scan data for
Roam Period seconds before considering
roaming
5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60,
or Custom 10 sec
BG Channel Set
Defines the 2.4GHz channels to be scanned
when the radio is contemplating a roam and
needs to determine what APs are available.
Full; 1,6,11 (the most
commonly used 2.4
GHz channels);
1,7,13 (for ETSI and
TELEC radios only); or
Custom Full
DFS Channels Support for 5GHz (802.11a) channels where
support for dynamic frequency selection
(DFS) is required. Supported in v2.0 and later On, Off, Optimized Off
DFS Scan Time Because passive scanning consumes a longer
period of time, this feature enables you to
determine the dwell time when passively
scanning on a DFS channel. A number between
20~500 milliseconds
(ms).
Recommending 1.5
times dwell time that of
beacon period. For
example, DFS scan time is
set to 30ms, the beacon
period should be
adjusted to 20ms
120
Ad Hoc Channel The channel to be used for an ad hoc
connection if the active profile has an Ad
Hoc radio mode value. One of the 2.4GHz
channels (1~14), or
UNII-1 channels (36,
40, 44, 48). If you
select a channel that is
not supported by your
radio, the SCU uses
the default value for
this setting 1
Aggressive Scan When this setting is On and the current
connection to an AP becomes tenuous, the
radio scans for available APs more
aggressively. Aggressive scanning
complements and works in conjunction with On, or Off On