Axon APT4 series User Manual Download

Page: 51 / 93

Chapter 3: Getting Understanding Details

Wifi – Profile

Profile settings are radio and security settings that are stored for each configuration
profile. Other than viewing the settings for each profile, the functions and settings located
on the Profile window are only available to administrator.

Windows CE6.0 Main Tab

Windows Embedded Handheld 6.5 Main Tab

Property and Value table:

Display the properties of each profile and its respective

value.

Profile drop-down menu:

Displays the current profile and a list of all profiles

previously configured or used.

New:

Allows a profile to be added to the list

Delete:

Deletes a profile from the list

Value box:

Displays the value of a prospective property.

Commit:

Saves the changed value.

The following properties are covered in the

Wi-Fi - Profile

Authentication / Bit Rate / Client Name / Encryption / Fast Reauth / Power Save / Profile
Name / Radio Mode / SSID / Tx Power / WPA/WPA2

For details, please refer the

Summit Client Utility Profile

description.

Summary of Contents for APT4 series






























































































Search results

Summary of Contents for APT4 series

Reviews:

Related manuals for APT4 series

Brands by name

Popular brands

Axon APT4 series, User Manual

Search results

Summary of Contents for APT4 series

Reviews:

Related manuals for APT4 series

Brands by name

Popular brands