8. Position the workpiece against the straight edge prior to
touching the leading edge of the workpiece against the
blade.
9. Slowly feed the workpiece into the blade, guiding the
workpiece against the straight edge and pressing the
workpiece down against the table.
CAUTION:
Do not force the leading edge of the workpiece into
the blade. The blade will deflect, reducing accuracy of cut, and
may break.
10. When the cut is complete, move the trailing edge of the
workpiece beyond the blade guard foot. Turn the switch
OFF.
MAINTENANCE
WARNING:
Always turn the switch OFF and unplug the
power cord from the outlet before maintaining or lubricating the
scroll saw.
To ensure that the wood glides smoothly across the work surface,
periodically apply a coat of paste wax to the surface of the
worktable. If the power cord is worn out or damaged in any way,
replace it immediately. Do not attempt to oil the motor bearings or
service the motor's internal parts.
Lubrication
Lubricate the arm bearings (one on each side of the saw) after
every 50 hours of use.
Quantity
Description
2
Small C-clamps
1
Ruler or measuring tape
1
12" straight scrap of wood
(thickness to match workpiece)
Tools needed
