W H I T E
A X M I N S T E R
W
09
Setting up the Grinder...
FREEPHONE
0800 371822
Axminster No.
AW8SRG2
Motor 250V 50Hz 900W
Wheel Size
200mm dia, 32mm wide 32 bore
Speed
1425rpm
Lamp (Twist Switch) Edison Screw Max 40W
Grinding Dust Extraction Port 40mm O/D
Footprint (Fully Assembled) 300mm High, 520mm Wide, 300mm Deep
Hold Down Slot (13mm) Fixing Centres 246mm
Weight 28Kgs
Carry out a final check e.g. start the machine, check it runs smoothly. On each side, check
that the spark guard is adjusted down to the stone, check the gap between the tool rest and
the stone is correct, check the stone is not badly deformed (rounded edges, grooved face,
etc; unless you have specifically shaped the stone to these profiles)check the eye shield is
correctly positioned. Have a cooling pot to hand if you need it, and remember safety
goggles are a good investment (you are only issued with 1 pair of eyes).
Specification...
