04
W H I T E
A X M I N S T E R
W
What’s in the Box...
The following suggestions will enable you to observe good working
practices, keep yourself and fellow workers safe and maintain your
tools and equipment in good working order.
Good Working Practices/Safety
WARNING!!
!
KEEP TOOLS AND EQUIPMENT OUT
OF THE REACH OF YOUNG CHILDREN
Model Numbers:
1 No:
(210647) AWBDC20 Air Compressor
YL90S-2
1 No:
(210648) AWBDC30 Air Compressor
YL90L-2
1 No:
Bottle of oil
1 No:
Instruction Manual
Remove compressor from packaging and check for damage or missing parts. Report any
problems to Axminster Power Tool Centre’s Customer Services Department.
Fit the wheels and air filter if not already fitted. Remove the oil filler plug and fill with a good
quality SAE 15W40 lubricating oil until the level is in line with the circle marked on the oil
level indicator.
The compressor is now ready for use.
Assembly Instructions...
Safety Precautions...
1. Always perform pre-operation checks before starting up the compressor.
2. Never leave inflammable objects or materials near to the compressor.
3. Always check oil level before using the compressor.
4. The cylinder, cylinder head and delivery pipe become hot during use. Do not touch these items
while the compressor is running. Allow to cool thoroughly after shut-down before handling.
5. Do not operate above the maximum working pressure of 120 psi (8 bar).
6. Avoid using the compressor with an extension cable; this may reduce the supply voltage and make
the motor overheat.
7. Switch the compressor on and off by using the pressure switch knob (See pages 06-08); only
switch off at the mains in case of emergency.
8. Drain water from tank every day.
9. If the compressor shuts down through overload or overheating check the reason for the shut-down
before re-starting.
