Removing Keyless Chuck
19
1. Lower the quill to its maximum depth by turning the lever
feed handle. While holding the handle turn the depth scale ring
(A) fully round and then tighten the butterfly depth stop clamp
(B) to lock the quill in position, see fig 37.
Fig 37
2. Place a piece of timber on the drill table to prevent the chuck
from being damaged.
3.While holding the handle in place turn the chuck to line up
the morse taper arbor in the quill’s machined slot, see fig 38.
Insert the morse taper drift (11) in the quill’s slot, thus pushing
the morse taper down and releasing the chuck, see fig 39-40.
Fig 38-39-40
Morse taper arbor
Depth scale ring
Quill slot
11
Summary of Contents for 105105
