Axminster Trade AT2552B, Original Instructions Manual

Page: 7 / 36

Specification
7
Code 105096
Model AT2552B
Rating Trade
Power
550W 230V 50Hz 1ph
Blade Speed 800m/min
Blade Length 2,552mm(100.1/2”)
Blade Width Min/Max 3mm(1/8”)/19mm(3/4”)
Max Width of Cut 340mm
Max Depth of Cut 200mm
Max Width of Cut with Fence 300mm
Table Size 500 x 356mm
Table Height on Stand 1,060mm
Table Tilt -5° to +45°
Table Height 490mm
Wheel Diameter 350mm
Dust Extraction Outlet 100mm
Overall L x W x H 690 x 720 x 1,770mm
Weight 84kg
Main Assembly
Your bandsaw is 90% assembled in order to reduce the
footprint of the machine for packaging, several items are
dismounted from the machine and need to be re-affixed.
WARNING! THE BANDSAW IS A HEAVY PIECE
OF MACHINERY, WE STRONGLY ADVISE YOU
GET THE ASSISTANCE OF ANOTHER PERSON
OR USE SOME SORT OF LIFTING DEVICE,
(HOIST, ENGINE CRANE), BEFORE YOU
ATTEMPT TO LIFT OR MOVE THIS MACHINE!
HAVING UNPACKED YOUR ACCESSORIES
PLEASE DISPOSE OF ANY UNWANTED
PACKAGING PROPERLY. THE POLYTHENE
AND CARD IS RECYCLABLE.
Stand Assembly
Fig 01
You will require the stand supports (02), stand support
brackets (03), M6 bolts (25), M6 shoulder nuts (22)
and M6 flat washers (20), see fig 01.
Step 1 Line up the first two pre-drilled holes in the
support bracket (03) with the holes to one side of the
support stand (02) and secure using the M6 bolts,
washers and nuts (20-22-25), see fig 2. Repeat for the
remaining stand and bracket.
NOTE: Make sure the support backets (03) are the correct
way round, otherwise the remaining holes in the stand
assembly will not line up.
Fig 02
Continues over....
03
02
20
22
25