5
Keep the particle filter clean. The machine relies on its
ability to ‘blow’ air through the filter, to generate good
suction. If the particle filter starts to clog, this reduces the
air flow and hence the machine becomes less efficient.
The particle filter can be cleaned, by removing the rear
filter cover (20) and using a vacuum cleaner, clean the
inside of the filter as illustrated on page 17.
Be aware that in dry air periods or areas, the movement
of the air through the machine can generate static
electric fields. These are not normally a problem as the
machine is bonded together via its construction and
the whole is earthed back through the electrical supply;
problems can occur with isolated items, such as stands
or hosing that are insulated from the ground (standing
on rubber feet?, suspended in the air etc).
If possible, try to connect everything together electrically,
to eliminate static shocks.
(Use the integral metal coil in flexible plastic hosing to
connect units together).
Try to route the power cable and the hosing away from
busy walkways.
Do not
allow the inlet to become ‘dead ended’, or block
or restrict the outlet, this puts undue strain on the motor
and can lead to overheating.
Code
105781 105783 105784
Model
AT154CEH 1.5HP
AT176CEH 2HP
AT357CEH 3HP
Rating
Trade Trade Trade
Power
1.1 kW 1Phase
1.5 kW 1Phase
2.2 kW 1Phase
Supply Circuit
20 Amps
20 Amps
30 Amps
Air Flow
1,600 m³/hr @ 150 mm
1,765 m³/hr @ 178 mm
3,700 m³/hr @ 200 mm
Sound Pressure
Level [Uncertainty K]
76 dB(A)
76 dB(A)
77 dB(A)
Static Pressure
2,440 Pa
2,490 Pa
2,735 Pa
Filter Performance
99.97% >0.3 micron
99.97% >0.3 micron
99.97% >0.3 micron
Filter Surface Area
2.5 m²
2.5 m²
4.35 m²
Container Volume
110 litre
168 litre
198 litre
Inlet
1 x 150 mm or 2 x 100 mm
1 x 178 mm or 3 x 100 mm 1 x 200 mm or 3 x 100 mm
Overall L x W x H
1,120 x 700 x 1,780mm
1,120 x 700 x 2,080mm
1,370 x 790 x 2,030mm
Weight
117kg 127kg 155kg
Specification
Assembly Instructions
Please read through the section entitled Parts identification and Description, this will enable you to more readily
identify those parts of the cyclone extractor.
Please note: some of this assembly procedure is best accomplished by two persons. Although
the tasks are not impossible, some of the items are heavy and awkward, and a mishandling
error could cause injury. Please think about what you are doing, your capabilities and your
personal safety. We have added the ‘two person symbol’ to any operation that we recommend
should be a two person task.
Unpack all the boxes and check all the components listed in the “What’s Included” section. If any parts or components
are missing, please contact our Customer Services Department using the procedures and telephone numbers listed
in our catalogue.
Please note: on occasions the packing list is not strictly adhered to. Please check all the boxes, packets
etc. to make sure that all the parts have been accounted for.
PLEASE RECYCLE ANY UNWANTED PACKAGING RESPONSIBLY!
Specific Safety for Dust Extractors
