Q U I C K - R E L E A S E P L AT E
The quick-release plate allows you to speedily mount
and dismount your camera with 1/4 in. and 3/8 in.
mounting studs. The studs can be stored in the
appropriate accessory sockets when not in use.
1. Loosen the quick-release plate locking knob.
2. Press the safety button, and slide the plate out of the
receiver.
3. Attach the quick-release plate to the bottom of your
camera, using either of the mounting studs.
4. Insert the camera/plate assembly into the plate receiver
while pressing the safety button.
5. Tighten the quick-release plate locking knob.
E X T E N D I N G T H E M O N O P O D
There are four sections with twist locks that allow you to
customize the length of the monopod.
1. With one hand around the padded grip, twist one of the
locks clockwise a quarter-turn, and extend the section.
2. Twist the lock counterclockwise to tighten and lock the
section in place.
Note: It is possible to use one hand to twist all of the locks at
the same time and extend all sections at once. Then you
can lock each section one at a time.
