Axis XP40-Q1765 User Manual Download Page 42

Page: 42 / 59

XP40-Q1765 Explosion-Protected PTZ Network Camera

About system options

About certificates

Certificates are used to authenticate devices on a network. Typical applications include encrypted web browsing (HTTPS), network
protection via IEEE 802.1X and secure upload of images and notification messages for example via email. Two types of certificates
can be used with the Axis product:

Server/Client certificates -

To authenticate the Axis product. A

Server/Client

certificate can be self-signed or issued by a Certificate

Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained.

CA certificates -

To authenticate peer certificates, for example the certificate of an authentication server in case the Axis product is

connected to an IEEE 802.1X protected network. The Axis product is shipped with several preinstalled CA certificates.

Note

• If the product is reset to factory default, all certificates, except preinstalled CA certificates, will be deleted.

• If the product is reset to factory default, all preinstalled CA certificates that have been deleted will be reinstalled.

How to create a self-signed certificate

1. Go to

Setup > System Options > Security > Certificates

2. Click

Create self-signed certificate

and provide the requested information.

How to create and install a CA-signed certificate

1. Create a self-signed certificate, see

How to create a self-signed certificate on page 42

2. Go to

Setup > System Options > Security > Certificates

3. Click

Create certificate signing request

and provide the requested information.

4. Copy the PEM-formatted request and send to the CA of your choice.

5. When the signed certificate is returned, click

Install certificate

and upload the certificate.

How to install additional CA certificates

1. Go to

Setup > System Options > Security > Certificates

2. Click

Install certificate

and upload the certificate.

Date & Time

The Axis product’s date and time settings are configured under

System Options > Date & Time

Current Server Time

displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see

below).

To change the date and time settings, select the preferred

Time mode

under

New Server Time

•

Synchronize with computer time

– Sets date and time according to the computer’s clock. With this option, date and

time are set once and will not be updated automatically.

•

Synchronize with NTP Server

– Obtains date and time from an NTP server. With this option, date and time settings are

updated continuously. For information on NTP settings, see

NTP Configuration on page 45

If using a host name for the NTP server, a DNS server must be configured. See

DNS Configuration on page 44

•

Set manually

– Allows you to manually set date and time.

If using an NTP server, select your

Time zone

from the drop-down list. If required, check

Automatically adjust for daylight saving

time changes

Summary of Contents for XP40-Q1765




























































Search results

Summary of Contents for XP40-Q1765

Reviews:

Related manuals for XP40-Q1765

Brands by name

Popular brands

Axis XP40-Q1765, User Manual

Search results

Summary of Contents for XP40-Q1765

Reviews:

Related manuals for XP40-Q1765

Brands by name

Popular brands