Axis WR056, Installation Manual, Page: 5 / 8

4-Pin Female
Connector
+
4-Pin Male
Connector
WR056
Battery
Camera
DC/12V
Automobile
Application
-
Optional CC056W
(Camera not included)
Monitor not included
5. WIRING
Connecting Monitor to WR056
Connecting Vehicle Battery to Optional CC056W
- Connect receiver with monitor.
- Switch monitor’s channel to that of receiver’s. Red light of receiver will flash.
Then “Wait TX Signal...” shows on screen.
- Press and hold the “PAIR” button on receiver for 5 seconds until the blue light flashes.
“PAIRING START xx” (xx is for one minute countdown time) shows on screen.
- Press and hold the “PAIR” button on the camera for 5 seconds.
“SAVE DATA” shows on screen.
- The camera’s image will switch automatically.
6. OPERATING INSTRUCTIONS