Axis T8508 PoE+, Installation Manual

Page: 10 / 14

AXIS T8516 POE+ Network Switch
Important
If a mini-GBIC is installed in slot 17-18, the associated RJ-45 port 17-18 is disabled and
cannot be used. Make sure the network cable is not connected to RJ-45 port 17-18 when
you install or remove a mini-GBIC.
1. Insert the module into the SFP slot.
2. Press firmly to ensure that the module seats into the connector.
Power notice
The product is a power-required device, meaning it will not work until it is powered. Consider using
an UPS (Uninterupted Power Supply) in order to avoid network data loss or network downtime.
Installing a surge suppression device may also help to protect the product from being damaged by
unregulated surge or current to the product or the power cord.
How to use the Mode/Reset button
By pressing the Mode/Reset button for certain period of time, users can perform the following tasks.
• Change between port status mode Link/Act/Speed and PoE.
• Reset the product to the previous configuration settings saved.
• Restore the product to the original factory default settings.
Mode/Reset button
Task to be performed Time period of
pressing button LED Port status LED
behavior
Change port status
mode between
Link/Act/Speed and
PoE
0-2 seconds
Green (lit)
LED status changes
according to the
selected mode.
Reset the product 2-7 seconds
Green (blink)
The lights are OFF for
all LEDs
Restore to the original
factory default
settings 7-12 seconds
Green (blink)
The lights are ON for
all LEDs
10