Axis Q6055-C, Installation Manual

Page: 16 / 156

AXIS Q6055-C PTZ Dome Network Camera
How to reset to factory default settings
Important
Reset to factory default should be used with caution. A reset to factory default resets all
settings, including the IP address, to the factory default values.
To reset the product to the factory default settings:
1. Press and hold the control button and the power button for 15–30 seconds until the
status LED indicator flashes amber. See .
2. Release the control button but continue to hold down the power button until the status
LED indicator turns green.
3. Release the power button and assemble the product.
4. The process is now complete. The product has been reset to the factory default settings.
If no DHCP server is available on the network, the default IP address is
192.168.0.90
5. Using the installation and management software tools to assign an IP address, set the
password and access the video stream.
It is also possible to reset parameters to factory default through the web interface. Go to Settings
> System > Maintenance and click Default .
16