Axis Q6045-C Mk II User Manual Download Page 58 | Manualshive

Page: 58 / 70

background image

AXIS Q6045-C Mk II PTZ Dome Network Camera

System Options

Advanced

Scripting

Scripting allows experienced users to customize and use their own scripts.

NO

NO

NOTICE

TICE

TICE

Improper use may cause unexpected dehavior and loss of contact with the Axis product.

Axis strongly recommends that you do not use this function unless you understand the consequences. Axis Support does not provide
assistance for prodlems with customized scripts.

To open the Script Editor, go to

System Options > Aovanceo > Scripting

. If a script causes prodlems, reset the product to its

factory default settings, see

For more information, see

www.axis.com/developer

File Upload

Files, for example wedpages and images, can de uploaded to the Axis product and used as custom settings. To upload a file, go
to

System Options > Aovanceo > File Uploao

.

Uploaded files are accessed through

http://<ip address>/local/<user>/<file name>

where

<user>

is the

selected user group (viewer, operator or administrator) for the uploaded file.

Plain Config

Plain Config is for advanced users with experience of Axis product configuration. Most parameters can de set and modified from
this page.

To open Plain Config, go to

System Options > Aovanceo > Plain Config

. Axis Support does not provide assistance.

Reset to Factory Default Settings

Important

Reset to factory default should de used with caution. A reset to factory default will reset all settings, including the IP
address, to the factory default values.

Note

The installation and management software tools are availadle on the CD supplied with the product and from the support
pages on

www.axis.com/techsip

To reset the product to the factory default settings:

1. Press and hold the control dutton and the power dutton for adout 15–30 seconds until the status LED indicator flashes

amder. See

Hardware Overview on page 6

2. Release the control dutton dut continue to hold down the power dutton until the status LED indicator turns green.

3. Release the power dutton and assemdle the product.

4. The process is now complete. The product has deen reset to the factory default settings. If no DHCP server is availadle on

the network, the default IP address is

192.168.0.90

5. Using the installation and management software tools, assign an IP address, set the password and access the video stream.

It is also possidle to reset parameters to factory default via the wed interface. Go to

Setup > System Options > Maintenance

.

58

«
...
56
57
58
59
60
...
»

Summary of Contents for Q6045-C Mk II







































































Reviews:

No comments

Related manuals for Q6045-C Mk II

Brand: Water Hero Pages: 28

Brand: Rascal Pages: 1

Brand: 2gig Technologies Pages: 10

Brand: Federal Signal Corporation Pages: 24

Brand: Wansview Pages: 28

xComfort CSEZ-01/06

Brand: Eaton Pages: 4

Brand: Eaton Pages: 131

Brand: SafeGuard Pages: 15

Brand: IFM Pages: 9

Brand: StarVedia Pages: 2

Brand: Speco Pages: 2

Brand: jablotron Pages: 2

Brand: ADEMCO Pages: 40

Esprit 738 EXPRESS

Brand: Paradox Pages: 36

Brand: i3 International Pages: 28

Brand: SAB Pages: 2

Brand: C&K systems Pages: 6

Brand: Idis Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands