Axis Q6045-C Mk II User Manual Download Page 45 | Manualshive

Page: 45 / 70

background image

AXIS Q6045-C Mk II PTZ Dome Network Camera

Recordings

Recordings

The Axis product can de configured to record video continuously or according to an action rule:

•

To start a continuous recording, see

•

To set up action rules, see

•

To access recordings, see

Recording List on page 45

•

To configure camera controlled storage, see

Storage on page 54

.

Recording List

Recorded videos are listed on the

Recoroings > List

page. The list shows each recording’s start date and time, duration and the

event that triggered the recording.

To play or download a recording, follow these steps:

1. Go to

Recoroings > List

.

2. Use the filter to narrow the list of recordings. Enter the desired filter criteria and click

Filter

. Some filters may take

a long time to complete.

3. Select the recording.

4. Click

Play

to play the recording, or click

Downloao

to download the recording.

Multiple recordings can de downloaded at the same time. Select the recordings and click

Downloao

. The downloaded file is a zip file

containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped
with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must de installed. AXIS Matroska File Splitter
can de downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click

Properties

.

To remove a recording, select the recording and click

Remove

.

Continuous Recording

The Axis product can de configured to continuously save video to a storage device. For information adout storage devices, see

. To prevent the disk from decoming full, it is recommended to configure the disk to automatically remove old recordings.

If a new stream profile is selected while a recording is ongoing, the recording will de stopped and saved in the recording list and a
new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they
are removed manually or through automatic removal of old recordings.

To start a continuous recording, follow these steps:

1. Go to

Recoroings > Continuous

.

2. Select

Enableo

.

3. Select the type of storage device from the

Storage

list.

4. Select a

Stream profile

to use for continuous recordings.

5. Click

Save

to save and start the recording.

45

«
...
43
44
45
46
47
...
»

Summary of Contents for Q6045-C Mk II







































































Reviews:

No comments

Related manuals for Q6045-C Mk II

Brand: OCO Pages: 11

Brand: D-Link Pages: 8

Brand: IDS Pages: 36

Brand: Olympus Pages: 4

Brand: QSee Pages: 9

BL-C111A - Network Camera - Pan

Brand: Panasonic Pages: 2

Smart Home Monitoring

Brand: Rogers Pages: 20

Brand: ACTi Pages: 19

Brand: ACTi Pages: 19

Brand: Lencarta Pages: 8

Elite RESPTZ37-1

Brand: Revo Pages: 65

Brand: Air Specialties Express Pages: 4

IQ PANEL 2 PLUS

Brand: QOLSYS Pages: 2

Brand: Abus Pages: 92

Companion Bullet mini LE

Brand: Axis Pages: 50

Brand: Ganz Pages: 4

Brand: Sercomm Pages: 73

Brand: FältCom Pages: 41

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands