AXIS Q604 Series
NO
NO
NOTICE
TICE
TICE
The product shall be connected using a shielded network cable (STP). All cables connecting
the product to the network shall be intended for their specific use. Make sure that the
network devices are installed in accordance with the manufacturer’s instructions. For
information about regulatory requirements, see
Electromagnetic Compatibility (EMC) on
page 2
.
I/O and Audio Connector
Terminal connector for connecting external equipment:
•
Audio equipment
•
Input/Output (I/O) devices
When connecting external equipment, a multi-connector cable (available from Axis) is required
in order to maintain the product’s IP rating. For more information, see
Multi-Connector Cable
(sold separately) on page 15
.
SD Card Slot
An SD card (not included) can be used for local recording with removable storage. For more
information, see
Specifications on page 17
.
NO
NO
NOTICE
TICE
TICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To
unmount, go to
Setup > System Options > Storage > SD Card
and click
Unmount
.
Note
For SD card recommendations see
www.axis.com
Control Button
The control button is used for:
•
Resetting the product to factory default settings. See
page 26
.
•
Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Power Button
Press and hold the power button to temporarily power the product when the dome cover is
removed. The power button is also used with the control button to reset the camera to factory
default settings. See
page 26
.
14
