background image

AXIS Q3518-LVE Network Camera

Additional settings

3. Select the stream profile and click

Audio

.

4. Select the checkbox and select

Include

.

5. Click

Save

.

6. Click

Close

.

Record and watch video

To record video you must first set up network storage, see

Set up network storage on page 11

, or have an SD card installed.

Record video

1. Go to the camera’s live view.

2. To start a recording, click

Record

. Click again to stop the recording.

Watch video

1. Click

Storage > Go to recordings

.

2. Select your recording in the list and it will play automatically.

Events

Set up rules and alerts

You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text when it records.

Record video when the camera detects motion

This example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and to
stop one minute after.

Make sure that AXIS Video Motion Detection is running:

1. Go to

Settings > Apps

>

AXIS Video Motion Detection

.

2. Start the application if it is not already running.

3. Make sure you have set up the application according to your needs.

Create a rule:

1. Go to

Settings > System > Events

and add a rule.

2. Type a name for the rule.

3. In the list of conditions, under

Application

, select

AXIS Video Motion Detection (VMD)

.

4. In the list of actions, under

Recordings

, select

Record video while the rule is active

.

5. Select an existing stream profile or create a new one.

6. Set the prebuffer time to 5 seconds.

7. Set the postbuffer time to 60 seconds.

8. In the list of storage options, select

SD card

.

12

Summary of Contents for Q3518-LVE






















Reviews: