AXIS Q1798-LE Network Camera
Specifications
LED indicators
Status LED
Indication
Unlit
Connection and normal operation.
Green
Shows steady green for 10 seconds for normal operation after startup completed.
Amber
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Amber/Red
Flashes amber/red if network connection is unavailable or lost.
Buzzer
Buzzer signal for leveling assistant
For information on the function button used for leveling the camera, see
Press and hold the function button for more than two seconds to level the camera.
•
When the camera is level, the beep is continuous.
•
When the camera is not level, the beep occurs at slow intervals.
SD card slot
NO
NO
NOTICE
TICE
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product’s webpage before removal.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see
.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
•
Resetting the product to factory default settings. See
Reset to factory default settings on page 29
Function Button
The function button has multiple functions:
•
As leveling Assistant
– This function helps to ensure the camera is level. Press the button for about 3 seconds to start
the leveling assistant and press again to stop. The status LED (see ) and buzzer signal assist leveling of the camera.
The camera is level when the buzzer beeps continuously.
•
To view the Status LED
– Press the button once to light up the Status LEDs. Press again to turn them off. The LEDs
will turn off automatically after 10 seconds.
34
