AXIS Q1656 Box Camera Series
Specifications
Buzzer
Buzzer signal for leveling assistant
For information about the control button used for leveling the image, see
.
Buzzer
Camera position
Continuous beep
Level
Fast beep
Almost level
Medium beeps
Not level
Slow beeps
Far from level
SD card slot
NO
NO
NOTICE
TICE
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product’s webpage before removal.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see
.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
•
Resetting the product to factory default settings. See
Reset to factory default settings on page 56
•
Ensuring the camera is level. Press the button for not more than two seconds to start the leveling assistant and press
again to stop. The buzzer signal (see
) assist leveling of the camera. The camera is level when the buzzer beeps
continuously.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
Audio connector
•
Audio in
– 3.5 mm input for a digital microphone, an analog mono microphone, or a line-in mono signal (left channel is
used from a stereo signal).
52
