Page 16
AXIS P5522 Installation Guide
AXIS Camera Management - multiple cameras/large installations
AXIS Camera Management can automatically discover multiple Axis devices, show connection
status, manage firmware upgrades and set IP addresses.
Automatic discovery
1. Check that the camera is connected to the network and that power has been applied.
2. Start AXIS Camera Management. When the network camera appears in the window, right-click
the link and select
Live View Home Page
.
3. See page 17 for instructions on how to set the password.
Assign an IP address in a single device
1. Select the network camera in AXIS Camera Management and
click the
Assign IP
button.
2. Select
Assign the following IP address
and enter the IP
address, subnet mask and default router the device will use.
3. Click
OK
.
Assign IP addresses in multiple devices
AXIS Camera Management speeds up the process of assigning
IP addresses to multiple devices, by suggesting IP addresses
from a specified range.
1. Select the devices you wish to configure (different models
can be selected) and click the
Assign IP
button.
2. Select
Assign the following IP address range
and enter
the range of IP addresses, the subnet mask and default
router the devices will use.
3. Click
Update
. Suggested IP addresses are listed under
New
IP Addresses
and can be edited by selecting a device and
clicking
Edit
.
4. Click
OK
.