background image

AXIS P37–PLE Network Camera Series

Additional settings

Set up network storage

To store recordings on the network, you need to set up network storage:

1. Go to

Settings > System

>

Storage

.

2. Click

Setup

under

Network storage

.

3. Enter the IP address of the host server.

4. Enter the name of the shared location on the host server.

5. Move the switch if the share requires a login, and enter username and password.

6. Click

Connect

.

Record and watch video

To record video you must first set up network storage, see

Set up network storage on page 14

, or have an SD card installed.

Record video

1. Go to the camera’s live view.

2. To start a recording, click

Record

. Click again to stop the recording.

Watch video

1. Click

Storage > Go to recordings

.

2. Select your recording in the list and it will play automatically.

Events

Set up rules and alerts

You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text when it records.

Trigger an action

1. Go to

Settings > System > Events

to set up a rule. The rule defines when the camera will perform certain actions. Rules

can be setup as scheduled, recurring, or for example, triggered by motion detection.

2. Select the

Condition

that must be met to trigger the action. If you specify more than one condition for the rule, all of the

conditions must be met to trigger the action.

3. Select which

Action

the camera should perform when the conditions are met.

Note

If you make changes to an active rule, then the rule needs to be restarted for the changes to take effect.

Record video when the camera detects motion

This example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and to
stop one minute after.

Make sure that AXIS Video Motion Detection is running:

1. Go to

Settings > Apps

>

AXIS Video Motion Detection

.

14

Summary of Contents for P37-PLE






















Reviews: