AXIS P14-LE Bullet Camera Series
Configure your device
Add an email recipient:
4. Go to
System > Events > Recipients
and add a recipient.
5. Type a name for the recipient.
6. Select
.
7. Type an email address to send the email to.
8. The camera doesn’t have it’s own email server, so it has to log into another email server to send mails. Fill in the rest of the
information according to your email provider.
9. To send a test email, click
Test
.
10. Click
Save
.
Create a rule:
11. Go to
System > Events > Rules
and add a rule.
12. Type a name for the rule.
13. In the list of conditions, under
Video
, select
Tampering
.
14. In the list of actions, under
Notifications
, select
Send notification to email
and then select the recipient from the list.
15. Type a subject and a message for the email.
16. Click
Save
.
Audio
Add audio to your recording
1. Go to
Video > Stream > Audio
and include audio.
2. If the device has more than one input source, select the correct one in
Source
.
3. Go to
Audio > Device settings
and turn on the correct input source.
4. If you make any changes to the input source, click
Apply changes
.
5. Edit the stream profile that is used for the recording:
5.1 Go to
System > Stream profiles
and select the stream profile.
5.2 Select
Include audio
and turn it on.
5.3 Click
Save
.
Connect to a network speaker
Network speaker pairing allows you to use a compatible Axis network speaker as if it is connected directly to the camera. Once
paired, the speaker acts as an audio out device where you can play audio clips and transmit sound through the camera.
Important
For this feature to work with a video management software (VMS), you must first pair the camera with the network speaker,
then add the camera to your VMS.
Pair camera with network speaker
1. Go to
System > Accessories > Network speaker pairing
.
18
