Axis P1365-E Mk II User Manual Download

Page: 14 / 74

AXIS P1365-E Mk II Network Camera

Access the Product

Controls on the Live View Page

Click

View size

to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG.

Click

WDR on

to enable WDR in intense backlight conditions. Click

WDR off

to disable WDR in low

light conditions for optimal exposure.

Select a stream profile for the Live View page from the

Stream Profile

drop-down list. For information

about how to configure stream profiles, see

page 24

Click

Pulse

to activate the product’s output port for a defined period of time. For information about how

to enable and configure output buttons, see

page 34

. The output button name may differ depending on

the name entered in the I/O Ports configuration.

Click the

Active/Inactive

buttons to manually activate and inactive the product’s output port. For

information about how to enable and configure output buttons, see

page 34

The

Manual Trigger

button is used to trigger an action rule from the Live View page. For information

about how to configure and enable the button, see

Manual Trigger on page 14

Click

Snapshot

to save a snapshot of the video image. This button is primarily intended for use when

the AXIS Media Control viewer toolbar is not available. Enable this button from

Live View Config >

Action Buttons

The

Audio clip

drop-down list allows you to play an audio clip from the Live View page. Select the

audio clip and click the

Play

button.

Manual Trigger

The

Manual Trigger

is used to trigger an action rule from the Live View page. The manual trigger can for example be used to

validate actions during product installation and configuration.

To configure the manual trigger:

1. Go to

Setup > Events

2. Click

Add

to add a new action rule.

3. From the

Trigger

drop-down list, select

Input Signal

4. From the second drop-down list, select

Manual Trigger

5. Select the desired action and configure the other settings as required.

For more information about action rules, see

Events on page 43

To show the manual trigger buttons in the Live View page:

1. Go to

Setup > Live View Config

2. Under

Action Buttons

, select

Show manual trigger button

Summary of Contents for P1365-E Mk II











































































Search results

Summary of Contents for P1365-E Mk II

Reviews:

Related manuals for P1365-E Mk II

Brands by name

Popular brands

Axis P1365-E Mk II, User Manual

Search results

Summary of Contents for P1365-E Mk II

Reviews:

Related manuals for P1365-E Mk II

Brands by name

Popular brands