AXIS P1357 Network Camera
System Options
To avoid filling the share, it is recommended to remove recordings continuously. Under
Recording Settings
, select
Remove recordings
older than
and select the number of days or weeks.
To stop writing to the share and protect recordings from being removed, select
Lock
under
Recording Settings
.
Ports & Devices
I/O Ports
The Axis product provides one input port and one output port for connection of external devices. For information about how to
connect external devices, see
Connectors on page 70
.
The I/O ports are configured under
System Options > Ports & Devices > I/O Ports
. The ports can be given descriptive names and their
Normal states
can be configured as
Open circuit
or
Grounded circuit
.
COM Port
The Axis product has one RS-485/RS-422 serial port. The port supports the following modes:
•
Generic HTTP
allows the Axis product to receive data and send commands via HTTP.
•
Pan Tilt Zoom
is used to control a PTZ device. The PTZ device requires a driver. See
Install PTZ Driver
for more information.
Drivers can be downloaded from www.axis.com
•
Generic TCP/IP
allows the Axis product to receive data and send commands via TCP/IP.
Select the desired
Port Type
from the drop-down list. For more information, see the online help
.
Port Status
The list on the
System Options > Ports & Devices > Port Status
page shows the status of the product’s input and output ports.
Maintenance
The Axis product provides several maintenance functions. These are available under
System Options > Maintenance
.
Click
Restart
to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current
settings.
Note
A restart clears all entries in the Server Report.
Click
Restore
to reset most settings to the factory default values. The following settings are not affected:
•
the boot protocol (DHCP or static)
•
the static IP address
•
the default router
•
the subnet mask
•
the system time
•
the IEEE 802.1X settings
•
the focus position
•
uploaded applications are kept but must be restarted
60
