AXIS P1347–E Network Camera
Video and Audio
• To select the default stream pro
fi
le go to
Live View Con
fi
g
>
Stream Pro
fi
le
and choose the pro
fi
le from the drop-down list.
For more information see the online help
on this page.
Camera Settings
The
Video & Audio > Camera Settings
page provides access to advanced image settings for the Axis product.
Capture Mode
Capture mode de
fi
nes the maximum resolution and maximum frame rate available in the Axis product. A capture mode with a large
maximum resolution has a reduced maximum frame rate and vice versa.
The capture mode setting also affects the camera’s angle of view as the effective size of the image sensor differs between capture
modes. If using a capture mode with a smaller maximum resolution, the angle of view is reduced.
Capture mode is set the
fi
rst time the product is accessed. Select the desired capture mode and click
OK
.
Changing capture mode when the product has been con
fi
gured is not recommended as most other settings will be either removed
or reset, for example:
1. Go to
Setup > Video & Audio > Camera Settings
.
2. Select the new capture mode.
3. Click
Save
.
4. Review and recon
fi
gure all settings, for example:
-
View areas
-
Stream pro
fi
les
-
PTZ settings including preset positions and guard tours
-
Motion detection windows
-
Privacy masks
-
Image overlays
-
Exposure zones
-
Action rules
-
Settings in uploaded applications
Image Appearance
Increasing the
Color level
increases the color saturation. The value 100 gives maximum color saturation. The value 0 gives a
black and white image.
The image
Brightness
can be adjusted in the range 0–100, where a higher value produces a brighter image.
Increasing the
Sharpness
can increase bandwidth usage. A sharper image might increase image noise especially in low light
conditions. A lower setting reduces image noise, but the whole image will appear less sharp.
The
Contrast
changes the relative difference between light and dark. It can be adjusted using the slidebar.
22
