Axis P1254, User Manual

Page: 32 / 58

AXIS P1254 Network Camera
Events
- Recording – Triggers the rule when the Axis product records to the storage device. The recording status trigger
can be used to notify the operator, for example by flashing LED lights, if the product has started or stopped to
record to the storage device. Note that, this trigger can be used only for edge storage recording status.
• System
- System Ready – Trigger the rule when the product has been started and all services are running. This can for
example be used to send a notification when the product restarts.
• Time
- Recurrence – Trigger the rule periodically. See Set Up Recurrences on page 34 . This can for example be used to
upload an image every 5 minutes.
- Use Schedule – Trigger the rule according to the selected schedule. See Create Schedules on page 34 .
Actions
Available actions include:
• Overlay Text – Display an overlay text. See How to include overlay text in an action rule on page 20 .
• Record Video – Record video to a selected storage.
• Send Images – Send images to a recipient.
• Send Notification – Send a notification message to a recipient.
• Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configured
under System Options > Network > SNMP .
• Send Video Clip – Send a video clip to a recipient.
• Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during
product installation and configuration.
• WDR Mode – The WDR Mode can be turned on or off when the action rule is triggered.
Add Recipients
The product can send media files and messages to notify users about events. Before the product can send media files or notification
messages, you must define one ore more recipients. For information about available options, see
Recipient Types on page 32 .
To add a recipient:
1. Go to Events > Recipients and click Add .
2. Enter a descriptive name.
3. Select a recipient Type .
4. Enter the information needed for the recipient type.
5. Click Test to test the connection to the recipient.
6. Click OK .
Recipient Types
The following recipients are available:
32