OS/2
The NetBEUI protocol must be active. If not, use MPTN/LAPS
(LAN Server) or SETUP (LAN Manager) to activate it.
Install the Axis Print Utility and your NPS 530/532:
1. Install the Axis Print Utility for OS/2: Insert the disk included
with your delivery, and execute
a:\axpu\install.exe
.
2. When Axis Print Utility is running, click
Install
to install your
NPS 530/532. It will then appear in the print server list as
AX<nnnnnn>.LP1
(<
nnnnnn>
are the last six digits of your NPS
530/532 serial number).
3. Select the print servers you want to install by clicking the
corresponding entries in the list, then click
Install
.
Repeat this procedure for each server using the NPS 530/532.
Important:
Axis Print Utility must be running when you print
through your NPS 530/532.
Create a Print Queue (OS/2 version 1.x):
1. Double-click the Print Manager icon, click
Setup
, then select
Printers...
2. Click
Add
to make a new printer definition, then type a name of
your choice in the Name field.
3. Select
\PIPE\AX<nnnnnn>.LP1
from the Device list, and select a
printer driver suitable for your printer.
4. Click
Add
, then click
OK
to confirm the printer definition.
5. Click
Setup
, then select
Queues...
6. Click
Add
to create a print queue, and type a name in the Name
field.
7. Click
Add
, then click
OK
to confirm the queue definition.
Create a Print Queue (OS/2 version 2.x):
1. Double-click the Templates folder, then drag the Printer icon out
to the Workplace Shell (or into a folder) while holding the right
mouse button down.
2. Type a name of your choice in the Name field.
3. Select
\PIPE\AX<nnnnnn>.LP1
from the Port list, and select a
printer driver suitable for your printer from the Standard printer
list.
4. Click
OK
to confirm the printer definition.
qi530eng.frm Page 6 Thursday, October 26, 1995 3:35 PM
