![Axis Network video Manual Download Page 112](http://html1.mh-extra.com/html/axis/network-video/network-video_manual_3038725112.webp)
112
12.4 Redundant storage
SAN systems build redundancy into the storage device. Redundancy in a storage system allows
video, or any other data, to be saved simultaneously in more than one location. This provides a
backup for recovering video if a portion of the storage system becomes unreadable. There are a
number of options for providing this added storage layer in an IP-Surveillance system, including
a Redundant Array of Independent Disks (RAID), data replication, server clustering and multiple
video recipients.
RAID.
RAID is a method of arranging standard, off-the-shelf hard drives such that the operating
system sees them as one large hard disk. A RAID setup spans data over multiple hard disk drives
with enough redundancy so that data can be recovered if one disk fails. There are different
levels of RAID, ranging from practically no redundancy to a full-mirrored solution in which there
is no disruption and no loss of data in the event of a hard disk failure.
Figure 12.4a Data replication.
Data replication.
This is a common feature in many network operating systems. File servers in a
network are configured to replicate data among each other, providing a backup if one server
fails.
Server clustering.
A common server clustering method is to have two servers work with the
same storage device, such as a RAID system. When one server fails, the other identically config-
ured server takes over. These servers can even share the same IP address, which makes the
so-called “fail-over” completely transparent for users.
Multiple video recipients
. A common method to ensure disaster recovery and off-site storage in
network video is to simultaneously send the video to two different servers in separate locations.
These servers can be equipped with RAID, work in clusters, or replicate their data with servers
even further away. This is an especially useful approach when surveillance systems are in hazard-
ous or not easily accessible areas, such as in mass-transit installations or industrial facilities.
CHAPTER 12 - BANDWIDTH AND STORAGE CONSIDERATIONS