AXIS 2120 Installation Guide
-
English
Page 4 of 5
Refining the Dial-up Networking Properties...
Having created the Dial-up connection for your AXIS 2120, follow the steps below to refine the
connection properties:
Initiating the Dial-up Connection...
Important!
Please ensure that the Null Modem Cable is correctly installed and that the relative connection properties are cor-
rectly configured prior to initiating a Dial-up connection. Step-by-step instructions on how to do this are provided
on the preceding pages of this section
Click the
Server Types
tag. From
the drop-down dialog, select
PPP
as the
Type
of Dial-Up Server.
From the Dial-up Networking dialog, right click the
dedicated Dial-up connection previously created for
you camera (
AxisCamera
was the connection created
used in this and previous examples). Select Properties.
In the Advanced options field,
check
Enable software compression
.
All other checkboxes should
remain unchecked.
In the
Allowed network protocols
field,
check the TCP/IP checkbox. NetBEUI
and IPX/SPX checkboxes should remain
unchecked.
Check the
Use IP header
compression
and
Use default
gateway on a remote network
checkboxes. Click OK.
Click the
Scripting
tag and ensure that the
Start
terminal screen minimized
checkbox is checked.
Click OK to exit
Dial-Up Networking Properties
.
Click TCP/IP settings and then
check the
Server assigned IP address,
and
Server assigned name server
addresses
radio buttons.
7
Double click the Dial-Up
connection icon that was
previously created for your AXIS
2120.
AxisCamera
was used in this
and previous examples.
Double click
My Computer
and
then double click the
Dial-Up
Networking
dialog.
Enter a Username and
Password using the default
root
and
pass
respectively.
Click Connect to initiate
the Dial-Up connection.
2120ig_master.fm Page 4 Monday, July 3, 2000 4:33 PM
