Axis MA 1205BT, Installation Manual

Page: 17 / 19

SIMPLE TROUBLESHOOTING GUIDE
Problem Cause/Solution
No power Check if fuse is blown.
Replace with the proper amperage
if necessary.
LCD Errors Press the RESET button.
Unable to receive stations Check and make sure the antenna is
inserted and properly connected.
Poor Reception Antenna may not be the proper length.
Make sure the antenna is fully extended.
If broken, replace the antenna with a
new one.
The broadcasting signal is poorly
grounded at its mounting location.
Disc cannot be loaded CD is loaded in the mechanism.
Tune the frequency accurately.
The broadcasting signal is too weak.
(Set to MONO mode).
No picture The video line from the main unit to the
monitor is not connected properly.
Picture interference Incorrect setting of the colour system.
Set the colour system to PAL or NTSC.
The CD’s are dirty or damaged