AXIS M5065 PTZ Network Camera
About wireless I/O (Z-Wave Plus
®
)
•
COMMAND_CLASS_NETWORK_MANAGEMENT_BASIC
•
COMMAND_CLASS_NETWORK_MANAGEMENT_PROXY
•
COMMAND_CLASS_NETWORK_MANAGEMENT_INSTALLATION_MAINTENANCE
•
COMMAND_CLASS_MANUFACTURER_SPECIFIC
•
COMMAND_CLASS_POWERLEVEL
•
COMMAND_CLASS_VERSION
•
COMMAND_CLASS_ASSOCIATION
•
COMMAND_CLASS_ASSOCIATION_GRP_INFO
•
COMMAND_CLASS_DEVICE_RESET_LOCALLY
How to add a Z-Wave device
Though not limited by the Z-Wave Plus protocol, your product’s event system allows you to add a maximum of six Z-Wave devices
at any given time. If the maximum number is reached, you need to remove a Z-Wave device before you can add a new one.
See
How to remove a Z-Wave device on page 38
.
1. Go to
Setup > Wireless I/O
.
2. Select
Enable Z-Wave
and click
Save
. You may need to wait for a few minutes for Z-Wave to become active.
3. Click
Add
. The product starts looking for Z-Wave devices in the Z-Wave network.
4. Set the Z-Wave device to be added into inclusion/exclusion mode as described in its User Manual.
5. If requested, enter the PIN delivered with the Z-Wave device, and click
Enter
.
6. Wait until the adding process is finalized as indicated by
Status: Done
on the web page. The device’s status information
window opens.
7. Click
Refresh
to update the Z-Wave device info, e.g. battery status, and add a name for the device. Click
Save
.
The added Z-Wave device with some status information is now visible on the
Z-Wave Device List
.
Note
If the Z-Wave device is not found, the adding process is terminated automatically.
To check the more detailed status information of the added Z-Wave device, select it from the
Z-Wave Device List
, and click
Modify
.
Note
Status information for an added Z-Wave device varies depending on the device type. Fore more information, see the
online help
.
You can set the product to trigger action rules with specified Z-Wave trigger conditions. The available Z-Wave triggers and actions
vary depending on the added Z-Wave device type. For more information, see
How to set up action rules on page 30
.
How to remove a Z-Wave device
How to remove a Z-Wave device through inclusion/exclusion mode
Note
This is the recommended removal procedure.
38
