Axis M3204 User Manual Download

Page: 39 / 50

AXIS M3204 Network Camera

System Options

To use SNMP v3, HTTPS must be enabled, see

HTTPS, on page 33

. To enable SNMP v3, check the box and provide the initial user

password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see

Reset to factory default settings, on page 41

UPnP

The Axis product includes support for UPnP

. UPnP

is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

UPnP

can be disabled under

System Options > Network > UPnP

RTP/H.264

The RTP port range and multicast settings are con

gured under

System Options > Network > RTP

The RTP port range de

nes the range of ports from which the video ports are automatically selected. For multicast streams, only

certain IP addresses and port numbers should be used.

Select

Always Multicast Video

to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

Bonjour can be disabled under

System Options > Network > Bonjour

Storage

Network Share

Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common

Internet File System) and use them for storage of recordings.

To add a network share:

1. Go to

System Options > Storage

2. Click

Network Share

3. Enter the IP address, DNS or Bonjour name to the host server in the

Host

eld.

4. Enter the name of the share in the

Share

eld.

5. If required, select

The share requires login

and enter the user name and password.

6. Click

Connect

To clear all recordings and data from the Axis product’s folder on the designated share, click

Clear

under

Storage Tools

To avoid

lling the share, it is recommended to remove recordings continuously. Under

Recording Settings

, select

Remove recordings

older than

and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select

Lock

under

Recording Settings

Summary of Contents for M3204



















































Search results

Summary of Contents for M3204

Reviews:

Related manuals for M3204

Brands by name

Popular brands

Axis M3204, User Manual

Search results

Summary of Contents for M3204

Reviews:

Related manuals for M3204

Brands by name

Popular brands